From : James Smallacombe <james@pil.net>
Sent : Friday, April 16, 2004 7:07 AM
To : sv@phystech.com
Subject : ubench results (dyslexia correction)
Intel ServerBoard SE7501CW2
2 x Intel Xeon 2.4Ghz 533FSB 512k cache
2 x 1GB ECC RAM
FreeBSD 4.10-BETA FreeBSD 4.10-BETA #1: Fri Apr 1 i386
Hyperthreading enabled and machdep.hlt_logical_cpus=0 set (allows logical
CPUs to task):
Ubench CPU: 166847
Ubench MEM: 129278
--------------------
Ubench AVG: 148062
Interestingly, if you disable logical CPU tasking
(machdep.hlt_logical_cpus=1), cpu performance goes DOWN a little but
memory performance goes UP a little more, and the average is slightly
More:
Ubench CPU: 160312
Ubench MEM: 139948
--------------------
Ubench AVG: 150130
Here's the output of dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-BETA #1: Fri Apr 16 02:29:04 EDT 2004
james@new.pil.net:/usr/src/sys/compile/NEW_MAIL
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2146959360 (2096640K bytes)
avail memory = 2087800832 (2038868K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400
Preloaded elf kernel "kernel" at 0xc0347000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
Using $PIR table, 20 entries at 0xc00fde80
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 18 -> irq 10
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on
pci1
pci2: <PCI bus> on pcib2
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on
pci1
IOAPIC #2 intpin 0 -> irq 11
pci3: <PCI bus> on pcib3
aac0: <Adaptec SCSI RAID 2200S> mem 0xf8000000-0xfbffffff irq 11 at device
1.0 on pci3
aac0: i960RX 100MHz, 48MB cache memory, optional battery present
aac0: Kernel 4.0-0, Build 6011, S/N ba906a
aac0: Supported
Options=1f7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,NORECOND,SGMAP64,ALARM,NONDASD>
pci0: <unknown card> (vendor=0x8086, dev=0x2544) at 2.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x6c00-0x6c1f
irq 2 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x6c20-0x6c3f
irq 5 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x6c40-0x6c5f
irq 10 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 21 -> irq 16
IOAPIC #0 intpin 20 -> irq 17
IOAPIC #0 intpin 23 -> irq 18
pci4: <PCI bus> on pcib4
pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 16
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x7400-0x743f mem
0xf4200000-0xf421ffff,0xf4241000-0xf4241fff irq 17 at device 4.0 on pci4
fxp0: Ethernet address 00:02:b3:e9:41:aa
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci4: <unknown card> (vendor=0x8086, dev=0x100e) at 5.0 irq 18
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xe3000-0xe3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
acd0: MODE_SENSE_BIG command timeout - resetting
ata0: resetting devices .. ata0-slave: ATAPI identify retries exceeded
done
acd0: CDROM <IDE/ATAPI CD-ROM 44XS> at ata0-master PIO4
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 69998MB (143357184 sectors)
Mounting root from ufs:/dev/aacd0s1a