From: Steven Enderle <panic@gnets.org>
Subject: ubench result on SGI Octane
Date: Thu, 03 Oct 2002 16:45:50 +0200
System: SGI Octane with R10000 195Mhz CPU, 512 MB RAM
OS: IRIX 6.5.17m
Compiler: GCC 3.0.4 with SGI ld/as
Makefile and compile output is included, but i am unsure about it.
At least it did compile.
Are there any optimized values i could use?
Compiled without -O
> ./ubench
Unix Benchmark Utility v.0.3
Copyright (C) July, 1999 PhysTech, Inc.
Author: Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/ubench.html
IRIX64 6.5 07121149 IP30
Ubench CPU: 7689
Ubench MEM: 5537
--------------------
Ubench AVG: 6613
Compiled with -O2, as seen in the makefile and compile-output
> ./ubench
Unix Benchmark Utility v.0.3
Copyright (C) July, 1999 PhysTech, Inc.
Author: Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/ubench.html
IRIX64 6.5 07121149 IP30
Ubench CPU: 7434
Ubench MEM: 16211
--------------------
Ubench AVG: 11822
> uname -aRp
IRIX64 h3ck 6.5 6.5.17m 07121149 IP30 mips
> gcc --version
3.0.4
> hinv
1 195 MHZ IP30 Processor
CPU: MIPS R10000 Processor Chip Revision: 2.7
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
> make
gcc -mabi=64 -O2 -Wall -L/usr/lib64/mips3 -c signals.c
as: Warning: , line 0: Unknown option: -nocpp
gcc -mabi=64 -O2 -Wall -L/usr/lib64/mips3 -c cpubench.c
cpubench.c: In function `cpucalc':
cpubench.c:71: warning: implicit declaration of function `log'
cpubench.c:72: warning: implicit declaration of function `abs'
cpubench.c:72: warning: implicit declaration of function `sqrt'
cpubench.c:72: warning: implicit declaration of function `cos'
cpubench.c:72: warning: implicit declaration of function `atan'
cpubench.c:72: warning: implicit declaration of function `sin'
cpubench.c:74: warning: implicit declaration of function `pow'
cpubench.c:77: warning: implicit declaration of function `exp'
as: Warning: , line 0: Unknown option: -nocpp
gcc -mabi=64 -O2 -Wall -L/usr/lib64/mips3 -c membench.c
as: Warning: , line 0: Unknown option: -nocpp
gcc -mabi=64 -O2 -Wall -L/usr/lib64/mips3 -c ubench.c
as: Warning: , line 0: Unknown option: -nocpp
gcc -mabi=64 -O2 -Wall -L/usr/lib64/mips3 -I. -o ubench signals.o cpubench.o membench.o ubench.o -lm
sh: strip: not found
*** Error code 127 (bu21)
###############################################################################
# #
# ubench Makefile #
# #
# Copyright (C) Sergei A. Viznyuk, July, 1999 #
# All rights reserved. #
# #
###############################################################################
#DEFINES=-DDEBUG
INSTALLDIR= /usr/local/bin
CC = gcc
CFLAGS = -mabi=64 -O2 -Wall -L/usr/lib64/mips3
LDFLAGS =
INCLUDES = -I.
objects = signals.o cpubench.o membench.o ubench.o
utimeobjects = creadok.o cwriteok.o tlock.o utime.o
ubench: $(objects)
$(CC) $(CFLAGS) $(LDFLAGS) $(INCLUDES) -o $@ $(objects) -lm
@(strip $@)
@(ls -l $@)
%.o: %.c
$(CC) $(CFLAGS) $(INCLUDES) -c $<
default: ubench
install: ubench
install -c -m 0555 ubench $(INSTALLDIR)
utime: $(utimeobjects)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^
@(strip $@)
@(ls -l $@)
clean:
rm -f ubench utime $(objects) $(utimeobjects) core *~