From: Yutaka Kojima <jima@mx2.wt.tiki.ne.jp>
Subject: Benchmark results
Date: Mon, 17 Jun 2002 11:33:43 +0900
OS: FreeBSD 4.5-RELEASE, with SMP kernel options enabled
M/B: Tyan Tiger 200T S2505TDNGR
CPU: 2 x PentiumIII 1.4GHz 512KB L2 cache
MEM: PC133 2GB RAM
Output from Ubench:
Unix Benchmark Utility v.0.3
Copyright (C) July, 1999 PhysTech, Inc.
Author: Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/ubench.html
FreeBSD 4.5-RELEASE FreeBSD 4.5-RELEASE #0: Sat Jun i386
Ubench CPU: 144840
Ubench MEM: 85716
--------------------
Ubench AVG: 115278
Output from dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Sat Jun 15 03:49:58 JST 2002
root@:/usr/obj/usr/src/sys/TYAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1396.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147418112 (2097088K bytes)
avail memory = 2086887424 (2037976K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04a7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fde00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 11 -> irq 2
IOAPIC #0 intpin 10 -> irq 5
IOAPIC #0 intpin 5 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <ATI Mach64-GR graphics accelerator> at 6.0 irq 2
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x9400-0x940f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x9800-0x981f irq 2 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9c00-0x9c1f irq 2 at device 7.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
atapci1: <Promise ATA100 controller> port
0xb000-0xb03f,0xac00-0xac03,0xa800-0xa807,0xa400-0xa403,0xa000-0xa007 mem
0xf6200000-0xf621ffff irq 5 at device 12.0 on pci0
ata2: at 0xa000 on atapci1
ata3: at 0xa800 on atapci1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem
0xf6000000-0xf60fffff,0xf6222000-0xf6222fff irq 10 at device 13.0 on pci0
fxp0: Ethernet address 00:e0:81:21:9a:66
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem
0xf6100000-0xf61fffff,0xf6221000-0xf6221fff irq 2 at device 14.0 on pci0
fxp1: Ethernet address 00:e0:81:21:9a:67
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xbc00-0xbcff mem
0xf6223000-0xf6223fff irq 2 at device 17.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xf6224000-0xf62240ff
irq 10 at device 18.0 on pci0
rl0: Ethernet address: 00:00:21:14:17:b8
miibus2: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus2
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ar0: 19092MB <ATA RAID1 array> [2434/255/63] subdisks:
ad4: 19092MB <WDC WD200EB-00BHF0> [38792/16/63] at ata2-master UDMA100
ad6: 19092MB <WDC WD200EB-00BHF0> [38792/16/63] at ata3-master UDMA100
acd0: CDROM <CD-ROM Drive/F5E> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ar0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MCE3064SS 0070> Removable Optical SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: Attempt to query device size failed: NOT READY, Medium not present