From: Rodolfo Martin y Raquel Niz <rodolfom@navegalia.com>
Subject: my results
Date: Tue, 24 Apr 2001 22:08:40 +0100
Hi Sergei!
I recently ran ubench in my system, and there's the results:
OpenBSD release 2.8
Generic kernel, no optimizations.
first test:
CPU - 11579
MEM - 8318
AVG - 9948
second:
CPU - 11579
MEM - 8300
AVG - 9939
third one:
CPU - 11579
MEM - 8282
AVG - 9930
My comp is an Intel PII at 266Mhz, L1 cache 512Kb (at half processor speed), L2 none, on a QDI Legend V motherboard (LX chipset), 128MB RAM on 2x64MB (66Mhz) DRAM modules.
For more details, the currently dmesg output is included:
Thanks and regards
-----
OpenBSD 2.8 (GENERIC) #399: Mon Nov 6 10:59:23 MST 2000
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
real mem = 133804032 (130668K)
avail mem = 119054336 (116264K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(9c) BIOS, date 11/23/97, BIOS32 rev. 0 @ 0xfb370
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb7e8]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfdc00, size 128 bytes (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB (Triton II) PCI-ISA" rev 0x00)
pcibios0: PCI Exclusive IRQs: 0
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 3090MB, 6280 cyl, 16 head, 63 sec, 6330240 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 1 lun 0: SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
wd1 at pciide0 channel 1 drive 0:
wd1: can use 32-bit, PIO mode 4, DMA mode 2
wd1: 16-sector PIO, LBA, 2062MB, 4190 cyl, 16 head, 63 sec, 4223520 sectors
pciide0: channel 1 interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x01 at pci0 dev 7 function 3 not configured
ne3 at pci0 dev 9 function 0 "Realtek 8029" rev 0x00: irq 9
ne3: address 00:4f:49:0d:06:51
vendor "Conexant", unknown product 0x1035 (class communications, subclass miscellaneous, rev 0x08) at pci0 dev 11 function 0 not configured
"S3 Trio32/64" rev 0x44 at pci0 dev 12 function 0 not configured
isa0 at pcib0
isadma0 at isa0
aic0 at isa0 port 0x340/32 irq 11
scsibus1 at aic0: 8 targets
st0 at scsibus1 targ 2 lun 0: SCSI2 1/sequential removable
st0: drive empty
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
ym0 at isapnp0 "OPL3-SAX Sound Board, YMH0021, , " port 0x220/16,0x530/8,0x388/4,0x330/2,0x370/2 irq 5 drq 0,1
midi1 at ym0:
audio0 at ym0
joy0 at isapnp0 "OPL3-SAX Sound Board, YMH0022, PNPB02F, " port 0x201/1
"OPL3-SAX Sound Board, YMH002F, , " at isapnp0 port 0x100/8 not configured
wdc2 at isapnp0 "OPL3-SAX Sound Board, YMH0024, PNP0600, " port 0x1e8/8,0x3ee/1 irq 11
biomask c840 netmask ca40 ttymask dac2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
pciide0:1:0: intr with DRQ (st=0x5a)