From:  Tom <>
Subject:  More Benchmarks 
Date:  Tue, 27 Mar 2001 00:10:46 -0800 (PST) 

FreeBSD 4.2-STABLE FreeBSD 4.2-STABLE #0: Fri Jan  i386
Ubench CPU:    95518
Ubench MEM:    60194
Ubench AVG:    77856

Dual PIII-850
Intel BX Motherboard
2 GB Ram

FreeBSD 4.2-STABLE #0: Fri Jan 26 18:58:11 PST 2001
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (846.32-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
real memory  = 2147418112 (2097088K bytes)
avail memory = 2087931904 (2038996K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0307000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030709c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
ti0: <Alteon AceNIC 1000baseSX Gigabit Ethernet> mem 0xf4200000-0xf4203fff irq
20 at device 4.0 on pci2
ti0: Ethernet address: 00:60:cf:20:96:54
ti1: <Alteon AceNIC 1000baseSX Gigabit Ethernet> mem 0xf4204000-0xf4207fff irq
23 at device 7.0 on pci2
ti1: Ethernet address: 00:60:cf:20:60:2e
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem
0xf4100000-0xf4100fff irq 19 at device 12.
0 on pci0
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem
0xf4101000-0xf4101fff irq 19 at device 12.
1 on pci0
aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem
0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 2
1 at device 14.0 on pci0
fxp0: Ethernet address 00:d0:b7:a9:15:dd
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device
18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata0-master using PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 1 lun 0
da0: <SEAGATE ST318404LC 0006> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)

	"Where am I and why am I in this handbasket?"
	Beat up a Spammer today -